× 1-800-946-2642 Home My Account Social / Forum Articles Contact My Cart
Shop Now
Select Your Car Type Sale Items Clearance Items New Items
This is a new Hydragas or Hydrolastic suspension pump with rubber seals to suit liquid pumping, complete with 400 psi (approx. 30 Bar) pressure gauge mounted on stainless steel fittings and 1 metre of high pressure hose with special angled adaptor, enabling easy access to the re-pressurization points.
The pump is built for hydragas suspension fluid and will also work well on antifreeze mixture, as this is a recognized alternative to reset the vehicle suspension height.
The unit is suitable for all cars using the standard Schrader inflator connections as found on Mini, Metro, Allegro, Austin 1100/1300, MGF and a variety of other Rover and Leyland vehicles.
The pump is provided with an instruction sheet to guide its operation and use, enabling the car owner to adjust and re-pressurize vehicle suspension systems, with guidance as to fluid type.
The pump unit displaces a relatively small volume of fluid but at a very high pressure ensuring fluid is properly supplied to the suspension system. Ride heights must be set according to manufacturers data, which is widely available.
Please note the unit does not generate vacuum, which is not a problem when correcting low or sagging suspension heights as any trapped air can easily be vented through other suspension components.
Garages will tell you it can only be done by them with specialist very expensive equipment, NOW you can do it yourself.


Fluid is available as part number MORRIS05
Classic Mini hydrolastic fluid pump, small lightweight version

Classic Mini hydrolastic fluid pump, small lightweight version

Classic Mini hydrolastic fluid pump, small lightweight version
Part No: TOOL01-SMALL
$265.98
Qty:
Fits the following:
Classic Mini
Alternate Products
Classic Austin Mini pump hydrolastic with gauge
$809.95 Classic Austin Mini pump hydrolastic with gauge
This is a new Hydragas or Hydrolastic suspension pump with rubber seals to suit liquid pumping, complete with 400 psi (approx. 30 Bar) pressure gauge mounted on stainless steel fittings and 1 metre of high pressure hose with special angled adaptor, enabling easy access to the re-pressurization points.
The pump is built for hydragas suspension fluid and will also work well on antifreeze mixture, as this is a recognized alternative to reset the vehicle suspension height.
The unit is suitable for all cars using the standard Schrader inflator connections as found on Mini, Metro, Allegro, Austin 1100/1300, MGF and a variety of other Rover and Leyland vehicles.
The pump is provided with an instruction sheet to guide its operation and use, enabling the car owner to adjust and re-pressurize vehicle suspension systems, with guidance as to fluid type.
The pump unit displaces a relatively small volume of fluid but at a very high pressure ensuring fluid is properly supplied to the suspension system. Ride heights must be set according to manufacturers data, which is widely available.
Please note the unit does not generate vacuum, which is not a problem when correcting low or sagging suspension heights as any trapped air can easily be vented through other suspension components.
Garages will tell you it can only be done by them with specialist very expensive equipment, NOW you can do it yourself.


Fluid is available as part number MORRIS05
 
 
Question:
Regarding TOOL01-SMALL, I would like to find out if you sell the fitting that connects from the tubing to the hydrolastic bleed valve. I have a pump, but my fitting has broken.
Answer:
No, we don't carry the fittings, just the entire pump as an assembly.

Mini Mania Tech Team

The Classic Mini Parts and Accessories Experts

 
 
Loading...
Loading...
Loading...
Loading...
Loading...
Loading...
Loading...
Loading...
Loading...
Loading...
Loading...
Loading...