× 1-800-946-2642 Home My Account Social / Forum Articles Contact My Cart
Shop Now
Select Your Car Type Sale Items Clearance Items New Items

Stage 2 Performance Upgrade Kit for the 3rd generation Clubman and Countryman. Includes a performance Intake and Exhaust for better flow in and out of the engine and an ECU Power Module increases power output while providing a more sporting exhaust note!

Fits the following models:

2016-2019 F54 MINI Cooper S Clubman
2017-2019 F60 MINI Cooper S Countryman

NOT FOR SALE IN CALIFORNIA - We are not able to ship this product to California addresses.

This kit includes:

  • K&N Performance Air Intake System
  • NM Engineering Downpipe back Exhaust System
  • NM Engineering ECU Power Module

Performance Air Intake System

The K&N 69-2026TTK Typhoon air intake system is a free-flowing, mandrel-bent aluminum tube air induction system designed to fit the 3rd generation Mini Cooper and Cooper S models. The restrictive factory air filter and air intake housing are replaced by the K&N Typhoon air intake which is designed to dramatically reduce air flow restriction as it smooths and straightens air flow. This allows your engine to inhale a larger amount of air than the factory air intake. More air means more usable power and acceleration throughout the engine’s RPM range.

NM  Engineering Downpipe back Exhaust System

NM exhaust systems are constructed from 100% aerospace quality T304 stainless steel – inside and out. Large diameter tubing and low restriction high flow stainless steel mufflers are carefully designed to reduce weight and meet State noise restriction standards. Polished muffler and tips, CNC mandrel bends are standard on every NM exhaust system. This system starts right after the downpipe at the factory v-band clamp for a complete bolt on solution without any cutting. The system features 76mm (3inch) tubing with dual 100mm (4") polished tips.

Notes for Exhaust System:

  • FITS NORTH AMERICA MODELS ONLY!
  • Require minor heat shield tweaking.
  • For off road or competition use only.

NM Engineering ECU Power Module

NM Engineering Power Module is a device which easily upgrades the performance of the new MINI Cooper S  without reducing the reliability or integrity of the engine, clutch and driveline. This is the simplest option and best lower cost alternative to ECU software upgrades. The NM Power Module is an all new proprietary hardware designed specifically for the MINI, not some rebranded 3rd party product for the BMWs. It is a plug and play solution that intercepts and modifies the T-MAP sensor signal for more performance. The NM Power Module can be installed or removed within minutes without leaving any trace or detection. The electrical components are housed in a billet aluminum enclosure which is protected from the elements and is designed and manufactured to be positioned within the engine bay of your MINI. The wire harness is manufactured using automotive quality wiring which is both oil and heat resistant for maximum durability and reliability.  The NM Power Module uses the same OE water proof connectors as used on your engine.

MINI Cooper S Stage 2 Upgrade Gen3 F54 Clubman F60 Countryman thru 2019

MINI Cooper S Stage 2 Upgrade Gen3 F54 Clubman F60 Countryman thru 2019

MINI Cooper S Stage 2 Upgrade Gen3 F54 Clubman F60 Countryman thru 2019
Part No: G3NMK3004
$1935.99
Qty:
Fits the following:
MINI (2002-Current)

Stage 2 Performance Upgrade Kit for the 3rd generation Clubman and Countryman. Includes a performance Intake and Exhaust for better flow in and out of the engine and an ECU Power Module increases power output while providing a more sporting exhaust note!

Fits the following models:

2016-2019 F54 MINI Cooper S Clubman
2017-2019 F60 MINI Cooper S Countryman

NOT FOR SALE IN CALIFORNIA - We are not able to ship this product to California addresses.

This kit includes:

  • K&N Performance Air Intake System
  • NM Engineering Downpipe back Exhaust System
  • NM Engineering ECU Power Module

Performance Air Intake System

The K&N 69-2026TTK Typhoon air intake system is a free-flowing, mandrel-bent aluminum tube air induction system designed to fit the 3rd generation Mini Cooper and Cooper S models. The restrictive factory air filter and air intake housing are replaced by the K&N Typhoon air intake which is designed to dramatically reduce air flow restriction as it smooths and straightens air flow. This allows your engine to inhale a larger amount of air than the factory air intake. More air means more usable power and acceleration throughout the engine’s RPM range.

NM  Engineering Downpipe back Exhaust System

NM exhaust systems are constructed from 100% aerospace quality T304 stainless steel – inside and out. Large diameter tubing and low restriction high flow stainless steel mufflers are carefully designed to reduce weight and meet State noise restriction standards. Polished muffler and tips, CNC mandrel bends are standard on every NM exhaust system. This system starts right after the downpipe at the factory v-band clamp for a complete bolt on solution without any cutting. The system features 76mm (3inch) tubing with dual 100mm (4") polished tips.

Notes for Exhaust System:

  • FITS NORTH AMERICA MODELS ONLY!
  • Require minor heat shield tweaking.
  • For off road or competition use only.

NM Engineering ECU Power Module

NM Engineering Power Module is a device which easily upgrades the performance of the new MINI Cooper S  without reducing the reliability or integrity of the engine, clutch and driveline. This is the simplest option and best lower cost alternative to ECU software upgrades. The NM Power Module is an all new proprietary hardware designed specifically for the MINI, not some rebranded 3rd party product for the BMWs. It is a plug and play solution that intercepts and modifies the T-MAP sensor signal for more performance. The NM Power Module can be installed or removed within minutes without leaving any trace or detection. The electrical components are housed in a billet aluminum enclosure which is protected from the elements and is designed and manufactured to be positioned within the engine bay of your MINI. The wire harness is manufactured using automotive quality wiring which is both oil and heat resistant for maximum durability and reliability.  The NM Power Module uses the same OE water proof connectors as used on your engine.

 
 
Question:
I own a MINI Cooper S Clubman 2017 (F54) and I was hoping you could provide some kind of installation instructions for the part listed above in the description.
Answer:
Below is what we have available. The exhaust is fairly straight forward other than adding some washers for clearance in the tunnel.
See Mini Cooper K&N Typhoon Installation Instructions.
See NM Power Module installation instructions here.

I found this for the exhaust:

See installation notes here.

Mini Mania Tech Team

The MINI Cooper Parts and Accessories Experts

 
 
Loading...
Loading...
Loading...
Loading...
Loading...
Loading...
Loading...
Loading...
Loading...
Loading...
Loading...
Loading...