× 1-800-946-2642 Home My Account Social / Forum Articles Contact My Cart
Shop Now
Select Your Car Type Sale Items Clearance Items New Items

The Ultimate Turbo Upgrade for your 2nd Generation Turbocharged Cooper S and JCW

Whether you are in need of a replacement or just looking for an upgrade, this Turbo is engineered to be a reliable and high-performance replacement that will outperform the factory JCW Turbos. This turbocharger is a direct replacement using the same K03 Turbo as stock, but with a larger compressor section to improve performance.


Features:

  • Larger 40mm compressor
  • Extended-tip compressor wheel
  • Designed for higher pressure
  • 360 bearing
  • High-temperature alloy turbine housing
  • Twin scroll turbine housing
  • Water-cooled bearing housing

This upgrade turbo is perfect for street use and delivers full race performance. It spools at 2000rpm, has great torque and is built to last. For race applications, we recommend pairing this turbo with a high-flow/low-backpressure aftermarket exhaust system to reach its full potential.


Compatible With:

N14 and N18 engine Gen2 Cooper S and JCW models:

  • R55 Clubman
  • R56 Hardtop
  • R57 Convertible
  • R58 Coupe
  • R59 Roadster
  • R60 Countryman
  • R61 Paceman


Specifications:

  • Gaskets Included NO
  • Seals Included NO
  • Studs Included NO
  • Other Hardware NO

Why Choose This Unit?

This unit not only improves performance, but it also saves you money. These units are engineered to be just as reliable as factory replacements, but with a bump in performance at a much lower cost than the factory replacement unit. It's a no-brainer!

We strongly recommend that you change the motor oil more frequently than the factory recommendation, use full synthetic motor oil with the ACEA A3/B3 specification, and drive easy before reaching your destination to reduce engine and oil temperatures. Also, make a habit of letting the engine idle for a couple of minutes before shutting off to help cool the turbo and prevent oil coking in the journals and bearings.

Please note that gaskets, seals, studs, and other hardware are NOT included; please see our Turbo Install Kit. This kit includes all the most commonly-replaced gaskets and seals, plus a new oil supply line. Additional gaskets, seals and other hardware may be required depending on the installation.

Upgrade your Cooper S with the ultimate turbo upgrade and experience the power and performance gains for yourself. Order your JMTC Turbo today!


NOTE:  Be sure to include the 17-digit VIN number from you MINI when ordering. 

The lower coolant line will need to be 'flipped' 180 degrees to clear the wastegate shaft.

If your interested in other options, check out our Turbo Application Guide.

For Turbo-related replacement hardware, see our Mini Cooper Turbo Installation Hardware Application Guide.


IMPORTANT INFORMATION

Read the Manufacturer's Installation Requirements below - THESE ARE REQUIREMENTS YOU MUST FOLLOW IN ORDER TO VALIDATE THE MANUFACTURER'S LIMITED WARRANTY - NO EXCEPTIONS.

Some States (like California) have ever tightening requirements for emissions testing and inspections. Always check your local regulations on compliance for street use.

Replace the turbo oil supply line with the turbo
Due to excess heat round the turbocharger and particulates suspended in the turbo supply oil the oil will harden or "coke~ in the turbo and oil supply lines. If the oil supplyline is not replaced with the turbocharger the coked oil will break free from the side walls of the oil supply line and damage the turbocharger bearings. Cleaning the oil line will not help and only aggravate and increase the likelihood of the turbo failure due to coked oil breaking free form the sidewall
Replace the catalytic converter on mini coopers before installing a new turbo
The Catalytic converters in the downpipe and B pipe may look clear but if any oil leaked into it some of the holes might be blocked and will cause back pressure. This starts to happen on Mini Coopers at 15k miles! Exhaust back pressure causes premature failure of the turbocharger. Turbochargers are not designed to have pressure on the exhaust side. As an alternative, have your catalytic converter refurbished to restore original flow
Prime the turbocharger
No oil on the turbocharger bearings will cause failure of the bearings if they are dry even for a short period of time. Prime the new turbo with oil before you connect the oil lines. For maximum protection, see Turbo Additive for Priming New Turbo's
Fresh engine oil with a turbocharger change
Perform an oil change with full synthetic motor oil at the factory recommended viscosity when you install a new turbo. Change the oil again after one heat cycle if: the engine is brand new, newly rebuilt, or if your MINI had a catastrophic turbo failure.

MANUFACTURERS WARRANTY STATEMENT

Manufacturers Limited Warranty covers all turbochargers to be free of defects in materials and workmanship for normal use and service up to 1 year (2 years if the oil line is replaced) after retail purchase. Manufacturer reserves the right to examine any part returned for warranty claim to determine whether a defect in materials or workmanship exists in such product. Manufacturer liability is limited to repairing, replacing or crediting towards other product, and credits will not exceed the invoice total for the parts.

Labor and storage charges are not products of the manufacturer and, therefore, will not be reimbursed for any reason. Final determination of the condition and suitability of the parts for uses contemplated by the buyer and is a sole responsibility of the buyer. Manufacturer will not be liable for any damage or injury to persons or property that might be claimed as a result of improper installation or misuse of any part subjected to this warranty. No warranty claim or refund, will be given until the item is in our possession and we have processed it which can take up to twenty (20) days.

Before installing any of our products, it is the responsibility of the installer/owner to fix or resolve any and all problems that cause the original part/item to fail and can cause the new part/item to fail. Since we do not troubleshoot, we take no responsibility for incorrectly diagnosing the issue that caused the initial part/item to fail. There are no warranties expressed or implied beyond those set forth above.


MINI Cooper S & JCW 40mm Turbo Upgrade | Gen2 R55 R56 R57 R58 R59 R60 R61

MINI Cooper S & JCW 40mm Turbo Upgrade | Gen2 R55 R56 R57 R58 R59 R60 R61

MINI Cooper S & JCW 40mm Turbo Upgrade | Gen2 R55 R56 R57 R58 R59 R60 R61
Selected: New Turbo
Part No: G2NME2840
$1270.48
Qty:
Fits the following:
MINI (2002-Current)
Alternate Products
MINI Cooper S Turbo K03 42mm Quick Spool Gen2 2007-2016
$1626.22 MINI Cooper S Turbo K03 42mm Quick Spool Gen2 2007-2016
Borg Warner Airwerks Turbocharger SX K03 MINI Cooper S EP6 HP Upgrade Gen2
$2049.95 Borg Warner Airwerks Turbocharger SX K03 MINI Cooper S EP6 HP Upgrade Gen2
Select variations below for more info:

Turbo upgrade / replacement  for your 2nd Generation Turbocharged Cooper S! This is a great upgrade for any stock unit and "Direct Replacement" using the same K03 Turbo as stock but with a slight upgrade in performance (larger compressor section). These units will outperform the factory JCW Turbos!  Engineered to be a reliable and high-performance replacement.  If your Turbo has 'bit the dust' - why not give it a bump in performance?

NOTE: Photos and images shown are approximations of the product and may not represent the actual product.

Refubished Turbos

SAVE $$$ !!!  Borg Warner supplies their K03 Turbocharger units to MINI for these models. These are the same Borg Warner units that have been Refurbished. Units are completely overhauled including replacement of all internal wearable items such as Turbine Shaft Bearings and Steel Thrust Plates. After the rebuild all internal components are triple balanced which is one step better then the manufacturer's dual balance process. Any components that do not meet JMTC's stringent standards will be replaced. Some parts that are damaged beyond repair may be replaced with JMTC parts but will retain the full One Year Limited Warranty.

FITS THESE MODELS:

The following Cooper S and JCW models:

2007-2013 R56 MINI Cooper S Hardtop including JCW
2008-2014 R55 MINI Cooper S Clubman including JCW
2009-2015 R57 MINI Cooper S Convertible including JCW 
2012-2015 R58 MINI Cooper S Coupe including JCW
2012-2015 R59 MINI Cooper S Roadster including JCW
2011-2016 R60 MINI Cooper S Countryman including JCW

Compatible with N14 and N18 engines.

Include the 17 digit vin number from you MINI when ordering.

NOTE:  The lower coolant line will need to be 'flipped' 180 degrees to clear the wastegate shaft.

See the Turbo Application Guide to see all the options for replacement and upgraded Turbo's.

For Turbo related replacement hardware, see our Mini Cooper Turbo Installation Hardware Application Guide.

TURBOCHARGER DETAILS

JMTC JCW Turbo

[ ] Larger 40mm compressor
[ ] Extended tip compressor wheel
[ ] Designed for higher pressure
[ ] 360 Bearing (unlike the factory Borg Warner JCW turbo)
[ ] High temperature alloy turbine housing
[ ] Twin scroll turbine housing
[ ] Water cooled bearing housing

The JCW Upgrade high pressure high-flow Dual scrolling turbine uses a extended tip compressor to give you boost that starts early and last long. this turbocharger delivers outstanding response with torque and power gains across the entire power-band. If you are looking for a great street upgrade that delivers full race performance this is the turbo for you. It will deliver great torque, spooling at 2000rpms, and last long. For race applications we recommend high flow / low backpressure aftermarket exhaust system which will allow this turbo to reach its full potential. This Turbo is engineered to be a reliable and high-performance upgrade turbo for Mini JCW (up to 255hp) and this version is built in the USA!  

Maximize your power gains with the ECU upgrade from the supplier of these Turbo upgrades.

CORE DEPOSIT

Additional Core Deposit is charged with every Turbo order. Core charges are refunded when a 'Rebuildable' and 'matching' core from your MINI is returned and inspected by the manufacturer.

All or part of the core deposit may be forfeited if the core:

  • Is severely damaged and not rebuildable
  • Does not match the unit being purchased (ie. if you send a stock turbo and order a JCW unit, part of the deposit is foreited).

The amount of core refund is determined at the discretion of the Turbo Manufacturer.

IMPORTANT INFORMATION

Read the Manufacturer's Installation Requirements below - THESE ARE REQUIREMENTS YOU MUST FOLLOW IN ORDER TO VALIDATE THE MANUFACTURER'S LIMITED WARRANTY - NO EXCEPTIONS.

Also read the related Tech Articles listed at the bottom of this page.

Some States (like California) have ever tightening requirements for emissions testing and inspections. Always check your local regulations on compliance for street use.

OTHER PARTS TO CONSIDER

Gaskets, seals, studs, and other hardware are NOT included. If you need to replace these items, order separately.

See our Turbo Install Kit. This kit includes all the most commonly replaced gaskets and seals, plus a new oil supply line. Additional gaskets, seals and other hardware may be required depending on the installation.

When servicing the Turbo on the MINI, it is very important (maybe even critical) that you replace the Turbo Oil Supply line to avoid potential future turbo issues.   (Included in the Turbo Install Kit).

Over time, the turbo and turbo supply line builds a fine layer of 'coked' or cooked oil on the internal surfaces. When you remove the supply line from the turbo, this disrupts the continuity of the coked layer with great potential of some of the coking to flake free. These coked oil particles can easily clog the fine journals that feed oil to the turbo bearings. Once the the oil flow is compromised, it is only a matter of time for cascading failures that can damage the turbo and catalytic converter! Don't take a chance - REPLACE the Oil Supply Line ! ! !

For additional protection, take a look at the Turbo Oil Supply Line Thermal Wrap.

For other TURBOCHARGER related products, see our TURBOCHARGER products page.

OUR ADVICE ON DRIVING A TURBOCHARGED MINI

We STRONGLY recommend you change the motor oil more frequently than the factory recommendation. Anecdotal evidence suggests Turbo's with more frequent oil changes have fewer issues. We suggest 5000 mile oil change interval or less. Make sure you use FULL SYNTHETIC motor oil with the ACEA (Association des Constructeurs Europeens d'Automobiles) A3/B3 specification.

After a long or hard drive, drive 'easy' for a while just before your destination. This will reduce the engine and oil temperatures to lower operating levels. Also make a habit to let the engine idle for a couple minutes before shutting off. This will help cool the turbo preventing oil coking in the journals and bearings. Yes, the MINI has an auxiliary water pump that runs after shutdown to help cool the turbo, BUT - the oil isn't cirulating - it just sits there waiting for the turbo to cool. This is why we recommend you idle before shutdown - let the oil circulate while the temperature comes down.

MANUFACTURER'S INSTALLATION REQUIREMENTS to validate Manufacturers Limited Warranty: 

[ ] Replace the turbo oil supply line with the turbo.
- - - Due to excess heat round the turbocharger and particulates suspended in the turbo supply oil the oil will harden or "coke~ in the turbo and oil supply lines. If the oil supplyline is not replaced with the turbocharger the coked oil will break free from the side walls of the oil supply line and damage the turbocharger bearings. Cleaning the oil line will not help and only aggravate and increase the likelihood of the turbo failure due to coked oil breaking free form the sidewall.

[ ] Replace the catalytic converter on mini coopers before installing a new turbo.
- - - The Catalytic converters in the downpipe and B pipe may look clear but if any oil leaked into it some of the holes might be blocked and will cause back pressure. This starts to happen on Mini Coopers at 15k miles! Exhaust back pressure causes premature failure of the turbocharger. Turbochargers are not designed to have pressure on the exhaust side. As an alternative, have your catalytic converter refurbished to restore original flow.

[ ] Prime the turbocharger.
- - - No oil on the turbocharger bearings will cause failure of the bearings if they are dry even for a short period of time. Prime the new turbo with oil before you connect the oil lines.  For maximum protection, see Turbo Additive for Priming New Turbo's

[ ] Fresh engine oil with a turbocharger change
- - - Perform an oil change with full synthetic motor oil at the factory recommended viscosity when you install a new turbo. Change the oil again after one heat cycle if:  the engine is brand new, newly rebuilt, or if your MINI had a catastrophic turbo failure.

MANUFACTURERS WARRANTY STATEMENT

Manufacturers Limited Warranty covers all turbochargers to be free of defects in materials and workmanship for normal use and service up to 1 year (2 years if the oil line is replaced) after retail purchase. Manufacturer reserves the right to examine any part returned for warranty claim to determine whether a defect in materials or workmanship exists in such product. Manufacturer liability is limited to repairing, replacing or crediting towards other product, and credits will not exceed the invoice total for the parts.

Labor and storage charges are not products of the manufacturer and, therefore, will not be reimbursed for any reason. Final determination of the condition and suitability of the parts for uses contemplated by the buyer and is a sole responsibility of the buyer. Manufacturer will not be liable for any damage or injury to persons or property that might be claimed as a result of improper installation or misuse of any part subjected to this warranty. No warranty claim or refund, will be given until the item is in our possession and we have processed it which can take up to 20days.

Before installing any of our products it is the responsibility of the installer/owner to fix or resolve any and all problems that cause the original part/item to fail and can cause the new part/item to fail. Since we do not troubleshoot, we take no responsibility for incorrectly diagnosing the issue that caused the initial part/item to fail. There are no warranties expressed or implied beyond those set forth above.

LEARN MORE ABOUT TURBOCHARGERS

Take a look at these informative videos that will help you avoid potential pitfalls with the Turbo:

How to Kill a New Turbo Part 1 - Oil Line

How to Kill a New Turbo Part 2 - Catalytic Converter

How to Kill a New Turbo Part 3 - No or Low Oil

How to Kill a New Turbo Part 4 - Using the Correct Oil

NOTE: Some states (like California) have ever tightening requirements for emissions testing and inspections. Always check your local regulations on compliance for street use.

 



The Ultimate Turbo Upgrade for your 2nd Generation Turbocharged Cooper S and JCW

Whether you are in need of a replacement or just looking for an upgrade, this Turbo is engineered to be a reliable and high-performance replacement that will outperform the factory JCW Turbos. This turbocharger is a direct replacement using the same K03 Turbo as stock, but with a larger compressor section to improve performance.


Features:

  • Larger 40mm compressor
  • Extended-tip compressor wheel
  • Designed for higher pressure
  • 360 bearing
  • High-temperature alloy turbine housing
  • Twin scroll turbine housing
  • Water-cooled bearing housing

This upgrade turbo is perfect for street use and delivers full race performance. It spools at 2000rpm, has great torque and is built to last. For race applications, we recommend pairing this turbo with a high-flow/low-backpressure aftermarket exhaust system to reach its full potential.


Compatible With:

N14 and N18 engine Gen2 Cooper S and JCW models:

  • R55 Clubman
  • R56 Hardtop
  • R57 Convertible
  • R58 Coupe
  • R59 Roadster
  • R60 Countryman
  • R61 Paceman


Specifications:

  • Gaskets Included NO
  • Seals Included NO
  • Studs Included NO
  • Other Hardware NO

Why Choose This Unit?

This unit not only improves performance, but it also saves you money. These units are engineered to be just as reliable as factory replacements, but with a bump in performance at a much lower cost than the factory replacement unit. It's a no-brainer!

We strongly recommend that you change the motor oil more frequently than the factory recommendation, use full synthetic motor oil with the ACEA A3/B3 specification, and drive easy before reaching your destination to reduce engine and oil temperatures. Also, make a habit of letting the engine idle for a couple of minutes before shutting off to help cool the turbo and prevent oil coking in the journals and bearings.

Please note that gaskets, seals, studs, and other hardware are NOT included; please see our Turbo Install Kit. This kit includes all the most commonly-replaced gaskets and seals, plus a new oil supply line. Additional gaskets, seals and other hardware may be required depending on the installation.

Upgrade your Cooper S with the ultimate turbo upgrade and experience the power and performance gains for yourself. Order your JMTC Turbo today!


NOTE:  Be sure to include the 17-digit VIN number from you MINI when ordering. 

The lower coolant line will need to be 'flipped' 180 degrees to clear the wastegate shaft.

If your interested in other options, check out our Turbo Application Guide.

For Turbo-related replacement hardware, see our Mini Cooper Turbo Installation Hardware Application Guide.


IMPORTANT INFORMATION

Read the Manufacturer's Installation Requirements below - THESE ARE REQUIREMENTS YOU MUST FOLLOW IN ORDER TO VALIDATE THE MANUFACTURER'S LIMITED WARRANTY - NO EXCEPTIONS.

Some States (like California) have ever tightening requirements for emissions testing and inspections. Always check your local regulations on compliance for street use.

Replace the turbo oil supply line with the turbo
Due to excess heat round the turbocharger and particulates suspended in the turbo supply oil the oil will harden or "coke~ in the turbo and oil supply lines. If the oil supplyline is not replaced with the turbocharger the coked oil will break free from the side walls of the oil supply line and damage the turbocharger bearings. Cleaning the oil line will not help and only aggravate and increase the likelihood of the turbo failure due to coked oil breaking free form the sidewall
Replace the catalytic converter on mini coopers before installing a new turbo
The Catalytic converters in the downpipe and B pipe may look clear but if any oil leaked into it some of the holes might be blocked and will cause back pressure. This starts to happen on Mini Coopers at 15k miles! Exhaust back pressure causes premature failure of the turbocharger. Turbochargers are not designed to have pressure on the exhaust side. As an alternative, have your catalytic converter refurbished to restore original flow
Prime the turbocharger
No oil on the turbocharger bearings will cause failure of the bearings if they are dry even for a short period of time. Prime the new turbo with oil before you connect the oil lines. For maximum protection, see Turbo Additive for Priming New Turbo's
Fresh engine oil with a turbocharger change
Perform an oil change with full synthetic motor oil at the factory recommended viscosity when you install a new turbo. Change the oil again after one heat cycle if: the engine is brand new, newly rebuilt, or if your MINI had a catastrophic turbo failure.

MANUFACTURERS WARRANTY STATEMENT

Manufacturers Limited Warranty covers all turbochargers to be free of defects in materials and workmanship for normal use and service up to 1 year (2 years if the oil line is replaced) after retail purchase. Manufacturer reserves the right to examine any part returned for warranty claim to determine whether a defect in materials or workmanship exists in such product. Manufacturer liability is limited to repairing, replacing or crediting towards other product, and credits will not exceed the invoice total for the parts.

Labor and storage charges are not products of the manufacturer and, therefore, will not be reimbursed for any reason. Final determination of the condition and suitability of the parts for uses contemplated by the buyer and is a sole responsibility of the buyer. Manufacturer will not be liable for any damage or injury to persons or property that might be claimed as a result of improper installation or misuse of any part subjected to this warranty. No warranty claim or refund, will be given until the item is in our possession and we have processed it which can take up to twenty (20) days.

Before installing any of our products, it is the responsibility of the installer/owner to fix or resolve any and all problems that cause the original part/item to fail and can cause the new part/item to fail. Since we do not troubleshoot, we take no responsibility for incorrectly diagnosing the issue that caused the initial part/item to fail. There are no warranties expressed or implied beyond those set forth above.


 
 
Question:
After replacing with your Turbo, is it going to have problem with check engine fault (reduce power)?
Answer:
Not if it is installed correctly.

Mini Mania Tech Team

The MINI Cooper Parts and Accessories Experts

 
 
 
 
Question:
Hey, for this turbo is the blow off valve/diverter considered upgraded out of the box? Or would it benefit from an upgrade such as the DV+?
Answer:
The turbo comes with the stock diverter. 

Yes, it would benefit from the DV+ if you choose this upgrade.
 
 
 
 
Question:
I'd like to buy this turbo for my 2007 New MINI Cooper S, my turbo just blew, it's blowing oil and has some shaft play but up and down only no in and out, would this qualify for the core or no? Where do you ship from also? Does it come with a warranty?
Answer:

From the product description:

"Manufacturers Limited Warranty covers all turbochargers to be free of defects in materials and workmanship for normal use and service up to 1 year (2 years if the oil line is replaced) after retail purchase. Manufacturer reserves the right to examine any part returned for warranty claim to determine whether a defect in materials or workmanship exists in such product. Manufacturer liability is limited to repairing, replacing or crediting towards other product, and credits will not exceed the invoice total for the parts."

as for the core, in most cases, we can accept just about any core - but it would have to be inspected to determine value. Keep in mind that Turbos should never fail, and if you're replacing a failed turbo you must address the cause of failure (excess backpressure, lack of oil supply, overheating) we cannot warranty turbos that are replaced without addressing those issues. 

The prices are listed on the product page: G2NME2840R currently $699.99 + Core + Shipping (you can get a shipping quote by clicking the "ship quote" button and entering your state and zip code. Also the OEM Oil Supply Line here: G2NME2218 @ $95.99

Mini Mania Tech Team

The MINI Cooper Parts and Accessories Experts

 
 
 
 
Question:
whats the hp rating on this turbo?
Answer:
From our product description:  "This Turbo is engineered to be a reliable and high-performance upgrade turbo for Mini JCW (up to 255hp)".

FOLLOW UP QUESTION:   okay and the $250 core charge is refunded when you receive the turbo I'm replacing?

FOLLOW UP ANSWER:  Yes, with some exceptions:

Additional Core Deposit is charged with every Turbo order. Core charges are refunded when a 'Rebuildable' and 'matching' core from your MINI is returned and inspected by the manufacturer.

All or part of the core deposit may be forfeited if the core:

  • Is severely damaged and not rebuildable
  • Does not match the unit being purchased (ie. if you send a stock turbo and order a JCW unit, part of the deposit is forfeited).

The amount of core refund is determined at the discretion of the Turbo Manufacturer.

 
 
 
 
Question:
I will be sending back my stock turbo will that count towards the core charge?
Answer:
Yes, The core charge is for the returned turbo. So once you purchase the new one we send out details and an RMA# to return the core (old turbo) for credit. Easy Peasy.
 
 
 
Loading...
Loading...
Loading...
Loading...
Loading...
Loading...
Loading...
Loading...
Loading...
Loading...
Loading...
Loading...
Related Technical Articles:
Mini Cooper Turbo Replacement / Upgrade: PRE-INSTALLATION NOTES
Created: October 28, 2013
TURBO PRE-INSTALLATION NOTES for JMTC Turbocharger Upgrades and Replacements. WARNING, PLEASE READ THESE IMPORTANT NOTES!Failure to heed these warnings can void your JMTC TurboCharger Warranty. See also:Turbocharger installation and Warranty information, Turbocharger Upgrade Technology...
MINI Cooper Countryman R60 Parts & Accessories
Created: July 31, 2019
Find R60 MINI Cooper Countryman parts and accessories. Remember, select your car for best results!