× 1-800-946-2642 Home My Account Social / Forum Articles Contact My Cart
Shop Now
Select Your Car Type Sale Items Clearance Items New Items
The original Special Tuning head 8 port head by Jim Whitehouse is the ULTIMATE Push rod head for the A-Series. This is however NOT A STRAIGHT BOLT ON PART.

It is supplied fully assembled with springs/top caps and utilizes the original size 35.6 inlet and 30.88 exhaust valves and will handle cam lifts up to .500"

Also in this kit is a set of correct length (.220"longer) push rods C-AEG583, manifold gasket C-AHT380 plus all the head studs. Block stud kit C-AHT282 is not included but available separately

Standard S con rods Number 2 and 4 usually need modification for clearance owing to cam lobe configuration. Con rods ready to fit are available as AEG625.

Special 8 port cams with different cam lobe configurations are required. Special exhaust manifold C-AHT343 is also required.

Combustion chamber is approximately 21cc to suit sensible compression ratios on big bore engines and from January 2012 the revamped head uses stepped guides which retain the valve spring platform as per all modern day race heads.

A special set of 8 port high-lift roller rockers in correct sequence and spacings are also available as C-AHT448 for this new head.

A fully programmable injection management kit is available as C-AJJ4065

A super large 37.2mm inlet valve head for special uses and large bore engines is available to special order as C-AJJ4064RACE.

Cylinder head nut torque setting is 50ftlbs

Homologated for Classic Cooper S but not 1275GT as it was overlooked by error and only the iron head was homologated for the 1275GT

8 Port Crossflow Arden Cylinder Head With Valves And Pushrods Kit | Classic Mini

8 Port Crossflow Arden Cylinder Head With Valves And Pushrods Kit | Classic Mini

8 Port Crossflow Arden Cylinder Head With Valves And Pushrods Kit | Classic Mini
Part No: C-AJJ4064
$2951.95
Qty:
Fits the following:
Classic Mini
The original Special Tuning head 8 port head by Jim Whitehouse is the ULTIMATE Push rod head for the A-Series. This is however NOT A STRAIGHT BOLT ON PART.

It is supplied fully assembled with springs/top caps and utilizes the original size 35.6 inlet and 30.88 exhaust valves and will handle cam lifts up to .500"

Also in this kit is a set of correct length (.220"longer) push rods C-AEG583, manifold gasket C-AHT380 plus all the head studs. Block stud kit C-AHT282 is not included but available separately

Standard S con rods Number 2 and 4 usually need modification for clearance owing to cam lobe configuration. Con rods ready to fit are available as AEG625.

Special 8 port cams with different cam lobe configurations are required. Special exhaust manifold C-AHT343 is also required.

Combustion chamber is approximately 21cc to suit sensible compression ratios on big bore engines and from January 2012 the revamped head uses stepped guides which retain the valve spring platform as per all modern day race heads.

A special set of 8 port high-lift roller rockers in correct sequence and spacings are also available as C-AHT448 for this new head.

A fully programmable injection management kit is available as C-AJJ4065

A super large 37.2mm inlet valve head for special uses and large bore engines is available to special order as C-AJJ4064RACE.

Cylinder head nut torque setting is 50ftlbs

Homologated for Classic Cooper S but not 1275GT as it was overlooked by error and only the iron head was homologated for the 1275GT

Loading...
Loading...
Loading...
Loading...
Loading...
Loading...
Loading...
Loading...
Loading...
Loading...
Loading...
Loading...
Related Technical Articles:
Classic Mini Cooper Cylinder Heads- High performance & Stock -28
Created: January 03, 2019
Road Sport and high performance race Cylinder heads are options when upgrading your engine. We offer both cast iron and alloy heads for street and race. Technical Information & guidance is available by live chat, phone or e-mail.
Created: July 03, 2001
Ben Howes 8 port has been at various shows this year, and was good enough to bring it down to Mini Spares' open day, with New Mini Spares 8 port fitted.