× 1-800-946-2642 Home My Account Social / Forum Articles Contact My Cart
Shop Now
Select Your Car Type Sale Items Clearance Items New Items
1.401" dia x 3.52" long intake valves. Our race valves are produced in EN214N steel, stellite tipped and use the later narrow collet groove and current valve head shapes. As it is possible, even common, to swap one head for another on 1275 engines, it is quite easy to become confused, or worse yet, confuse the parts-guy when it is time to order new valves! Be aware that if the head has been worked on previously, it may have oversize valves; it may have undersize if seats have been installed. Unless you are 100% sure what is in your cylinder head, it is a good idea to remove a valve for accurate measurement. There are two lengths used (nominally 3.52" & 3.57") three different keepers, (wide, narrow, and three-groove) and many different head diameters! These valves are in stock at Mini Mania! Early Cooper S valves If your 970, 1071, or early 1275 Cooper S still has the original AEG163 head casting, you must use short, 3.52" valves.
Classic Austin Mini Intake Valve 1.4 X 3.53 Small Keeper (aeg163)

Classic Austin Mini Intake Valve 1.4 X 3.53 Small Keeper (aeg163)

Classic Austin Mini Intake Valve 1.4 X 3.53 Small Keeper (aeg163)
Part No: AEG593
$72.95
Qty:
Fits the following:
Classic Mini
Sprite & MG Midget
Morris Minor
1.401" dia x 3.52" long intake valves. Our race valves are produced in EN214N steel, stellite tipped and use the later narrow collet groove and current valve head shapes. As it is possible, even common, to swap one head for another on 1275 engines, it is quite easy to become confused, or worse yet, confuse the parts-guy when it is time to order new valves! Be aware that if the head has been worked on previously, it may have oversize valves; it may have undersize if seats have been installed. Unless you are 100% sure what is in your cylinder head, it is a good idea to remove a valve for accurate measurement. There are two lengths used (nominally 3.52" & 3.57") three different keepers, (wide, narrow, and three-groove) and many different head diameters! These valves are in stock at Mini Mania! Early Cooper S valves If your 970, 1071, or early 1275 Cooper S still has the original AEG163 head casting, you must use short, 3.52" valves.
Loading...
Loading...
Loading...
Loading...
Loading...
Loading...
Loading...
Loading...
Loading...
Loading...
Loading...
Loading...
Related Technical Articles:
Classic Mini Cooper Intake & Exhaust Valves & Cam Followers - 30
Created: January 03, 2019
Standard Production & Competition Valves for all Classic Mini cylinder heads available in sizes to fit. Over-sized options with various collet designs will suite every need. Cam followers both stock, High Performance or race versions are also available.
Do I need to do a Valve Job on My Classic Mini?
Created: April 25, 2014
Most motors will go at least 80,000 miles before "needing a valve job"! But what are the signs? How do I determine if I really need it? Do I do it myself or pay a local machine shop.
Valve Stem Keepers
Created: October 10, 2011
Call them cotters, collets or keepers, these little items are often overlooked during a head rebuild. If yours are worn and need to be replaced, make sure you order the right ones. Minis used three different versions over the years.