Filler strip tool for dummies
Created by: RedRiley
Total posts: 232
Last post: Jan 20, 2024 Member since:Jul 21, 2000
|
Cars in Garage: 0
Photos: 0 WorkBench Posts: 0 |
|
Keith and Deb know of what they speak, they made that exact tool to replaced the windshield in my mini on the side of the road on the way to the mini meet in Atlanta in 91 when a semi sent a rock right through my windshield.
Bruce
Bruce
Total posts: 1398
Last post: Dec 25, 2020 Member since:Mar 9, 2000
|
Cars in Garage: 0
Photos: 0 WorkBench Posts: 0 |
|
Take a piece of wire hanger. Bend the middle into a diamond shape. Leave about 2" of the wires and hold it with a set of vice grips. The best lubricant is dish soap. The masking tape is a good idea. The Bone can be any piece of Teflon that you can grind into a point to help push the strip in.
If both the rubber strip and the filler are no it will not be hard to insert the locking strip.
IF you are trying to install a new strip into an old seal you might tear the seal...
If both the rubber strip and the filler are no it will not be hard to insert the locking strip.
IF you are trying to install a new strip into an old seal you might tear the seal...
Keith & Deb
Avatar:Turn 1 at the Glen
Total posts: 256
Last post: Aug 26, 2023 Member since:Nov 26, 2017
|
Cars in Garage: 0
Photos: 0 WorkBench Posts: 0 |
There is another topic re: windshield and plastic strip install which. I found helpful.
a local auto glass installer gave me a plastic “bone” which when used with the fillet tool was great.
google “windshield bone tool”
a local auto glass installer gave me a plastic “bone” which when used with the fillet tool was great.
google “windshield bone tool”
Roger Williams
1966 Austin Cooper S
LHD, WET, Personal Export
1966 Austin Cooper S
LHD, WET, Personal Export
Total posts: 2515
Last post: Dec 14, 2021 Member since:May 28, 2012
|
Cars in Garage: 0
Photos: 0 WorkBench Posts: 0 |
|
Red Riley,
K Y. Jelly works wonders, Check with Malcolm he has a supply of it , apparently he doesn’t need it anymore. LOL
BIG AL
K Y. Jelly works wonders, Check with Malcolm he has a supply of it , apparently he doesn’t need it anymore. LOL
BIG AL
Niagara Ontario Canada
Total posts: 8382
Last post: Jan 13, 2022 Member since:Feb 7, 2006
|
Cars in Garage: 0
Photos: 0 WorkBench Posts: 0 |
|
Use plenty of lubrication it makes the job a lot easier. Also if you are afraid of slipping and gouging the paint duct tape may help even double thickness in some places.
I have found that the black molding is easier to install maybe it is slightly smaller than the chrome and it does not yellow like the chrome.
I have found that the black molding is easier to install maybe it is slightly smaller than the chrome and it does not yellow like the chrome.
If in doubt, flat out. Colin Mc Rae MBE 1968-2007.
Give a car more power and it goes faster on the straights,
make a car lighter and it's faster everywhere. Colin Chapman.
Total posts: 2100
Last post: Oct 22, 2023 Member since:May 1, 2007
|
Cars in Garage: 1
Photos: 220 WorkBench Posts: 0 |
|
Mal, I did buy this one from an auto parts place, but it's still probably junk. It's got some sharp edges that don't look like they would be real rubber friendly. I'm going to spent some time filing it smooth before I give it a try.
Total posts: 8382
Last post: Jan 13, 2022 Member since:Feb 7, 2006
|
Cars in Garage: 0
Photos: 0 WorkBench Posts: 0 |
|
Quote:
Originally Posted by RedRiley
This tool. Do you push away from you, or pull toward you? You would think it would be more obvious.
The ones sold by the Mini suppliers are usually junk buy one from an automotive body shop supplier.
If in doubt, flat out. Colin Mc Rae MBE 1968-2007.
Give a car more power and it goes faster on the straights,
make a car lighter and it's faster everywhere. Colin Chapman.
Total posts: 2100
Last post: Oct 22, 2023 Member since:May 1, 2007
|
Cars in Garage: 1
Photos: 220 WorkBench Posts: 0 |
|
This tool. Do you push away from you, or pull toward you? You would think it would be more obvious.