cutting a MK 1/2?? needing sections
Created by: Minimike1
Orig. Posting Date | User Name | Edit Date |
Apr 17, 2018 09:03AM | Minimike1 | |
Apr 17, 2018 08:24AM | swindrum | |
Apr 16, 2018 05:13PM | Minimike1 |
Total posts: 6908
Last post: Dec 4, 2023 Member since:Feb 26, 1999
|
Cars in Garage: 0
Photos: 0 WorkBench Posts: 0 |
|
some cars are crashed and put out to pasture. If they were garaged, rust is not necessarily the issue. Meanwhile, the car I have has the most solid floors I've ever seen on a mini, but apparently had a bad rear seal in the back glass. Hence the water damage and rust localized under the seat back . I only need partial companion boxes and I can fabricate that as it's flat stock. The seat bottom and back have stamping for reinforcement and that's what I'd rather have than flat repairs patched in.
Total posts: 1456
Last post: Jan 31, 2022 Member since:Sep 8, 2003
|
Cars in Garage: 1
Photos: 186 WorkBench Posts: 0 |
|
Having just cut up a car, I would say that saving the companion bins would be more trouble than they are worth, considering they are now available.
https://www.minimania.com/part/COMPANION-P/Classic-Mini-Companion-Box-For-Externally-Hinged-Door-Model
Same with the boot floor... Any car rotten enough to cut up, would not have a viable boot floor anyway.
https://www.minimania.com/part/COMPANION-P/Classic-Mini-Companion-Box-For-Externally-Hinged-Door-Model
Same with the boot floor... Any car rotten enough to cut up, would not have a viable boot floor anyway.
Sean Windrum
1996 MGF VVC
1970 1275 GT Racer
66 Austin Countryman
63 997 Cooper (Under Construction)
63 MG 1100
Total posts: 6908
Last post: Dec 4, 2023 Member since:Feb 26, 1999
|
Cars in Garage: 0
Photos: 0 WorkBench Posts: 0 |
|
Looking for companion boxes, r and l side of back seat, and boot floor. My rear of the boot floor is good. It's rotted at the seat back and the back seat bottom going a few inches into the boot. Also need the lower half of the seat back.
let me know what you have. If it's local, I can cut it myself.
let me know what you have. If it's local, I can cut it myself.