Created: April 19, 2018
The world of Vintage racers seem to be ever expanding and so does the use of the venerable Ribcase transmission. A set of Close Ratio Straight cut gears can make a big difference in performance and driving pleasure.
Created: April 25, 2014
Dog engagement is typically limited to racing applications where fast, precise shifting is needed. Dog gear engagement works by having numerous large teeth or ‘dogs’ that mate into matching openings machined into the opposite surface of the drive gear. Unlike the synchro engagement, there is no synchronizing mechanism to assist in equalizing speed.
Created: April 24, 2014
The "Ribcase" acronym for the gearbox as found as stock in most later '60's and '70's. The original design parameters were conceived around a small displacement low torque and horsepower engine and the "Smooth-case" transmission. The demands on this gearbox were well within design limits. Over the years the engines got bigger and bigger as did the weight of the cars they were installed in.
Created: October 30, 2000
Elsewhere we've considered what alternative standard production ratios are available - but that still leaves you with the power-consuming and limited-ratio alternatives helical tooth type gears. Not desirable in a competition orientated car. The solution to this comes in the form of several types of straight-cut gear sets
Created: October 16, 2000
Fitting an LSD isn't as simple as replacing the diff cage unit. In all cases a certain degree of diff housing modifications is needed - material needing to be ground/filed away to provide clearance for larger diff housing cases and crown wheel bolts. Although it has to be said the Quaife diff is supposed to fit without these mods. I've never found that.
Created: October 16, 2000
Modified engines producing more power generally induce owners to drive with greater verve, particularly when competing in one of the many motorsport disciplines. In fact this isn’t isolated to modified Minis. Owners of relatively standard machinery competing in a discipline or merely out on a country lane blast are subject to the same determination.
Created: January 30, 2000
When most folk talk about limited slip differentials for cars with a BMC rear end, the minds immediately turn to the "Salisbury". Indeed many think that word covers any LSD for a BMC. This of course is not so. The Salisbury diff was designed in the 50's at a time when race cars were not sophisticated, tires were usually crossply with limited grip due to port compounds, and tracks were more than a little bumpy. Agriculturally built cars needed diffs built along similar lines. High static loads were more than common to help compensate for shortfalls in chassis and tire design -