Your Order May Be Delayed As Our Shipping Partners Are Experiencing Unexpected Issues. Read More
We have detected you're not on the correct site for the car you have selected! Click the green button below to go to the correct site.
Select your car: 
BMW Mini Cooper
Select
Distributors
Troubleshooting Lucas Points
Created: May 14, 2008
Troubleshooting Lucas Points The following document discusses the operation of the basic “points type” ignition system. Included are steps to troubleshoot the ignition system. This document presents a negative ground system only. Please read the Theory of Operation section before attempting to troubleshoot your ignition system.
123 Ignition Mounting Instructions
Created: January 31, 2006
Mounting instructions for the '123ignition' type : 123\MINI-R-V & 123\MINI-R-V-A+ for : all 6 & 12 Volt cars, negative earth only ! IMPORTANT Please read the entire instructions before you begin installation. If after reading you are unsure of the procedure to be followed, please ask som...
Initial ignition Timing Set-Up and Distributor Guide
Created: September 25, 2000
Any deviation away from the original standard engine specification, or where a dizzy from another source is used in the engine you have, the ignition timing will generally be different from that set by the manufacturer.
Created: September 15, 2000
Any dizzy can be set to get maximum power. No problem. Unfortunately that's only one spot on the whole power curve/rpm range. If the curve isn't right elsewhere, the engine will be either loosing power - in some instances by substantial amounts - or detonating its self into oblivion and a costly re-build.
DISTRIBUTORS - working basics.
Created: September 15, 2000
To maximize power and economy potential from any engine, burning the compressed fuel/air mixture at precisely the right point throughout the engines entire rpm range is essential. This ‘point’ is generally somewhere before the piston reaches TDC on its power stroke described in degrees - i.e. 10 degrees BTDC.
DISTRIBUTOR - Electronic ignition
Created: September 15, 2000
Since the A-Series has such an efficient combustion chamber design, the standard points set-up is perfectly capable of providing sufficient sparks for effective combustion when new. And this is the problem. They require regular servicing to maintain maximum performance. This can be a chore, so is generally neglected.
Driving Lights
PIAA Lights Frequently Asked Questions-MINI Cooper
Created: January 12, 2007
PIAA Lights Frquently Asked Questions-MINI Cooper FREQUENTLY ASKED QUESTIONS Are these legal? PIAA lamps are intended for use solely as auxiliary lighting. Lighting laws vary from state to state. PIAA makes no representation or warranty, either expressed or implied, as to the legality of its products for street use on any vehi...
How To Articles
HOW TO CONVERT FROM GENERATOR TO ALTERNATOR
Created: September 16, 2005
Minis built up to 1969 (i.e. MKI  &  MKII) were positive ground while MKIII and onwards were built negative ground. The polarity of the alternator can not be changed, so if the alternator you have does not conform to your car, you must change your car. 
How to Change from Dynamo to Alternator
Created: September 01, 2000
Completing this change successfully, easily and neatly is pretty straight forward on a Mini. The alternator contains the regulator and cut out functions within it’s casing, so makes the regulator box used with a dynamo redundant. However, it is useful to retain the box itself and it’s connectors.
How to change battery polarity
Created: January 29, 2000
When fitting a new or rebuilt generator to your Mini, certain instructions will usually be found with it. These instructions advise the course of action to polarize the unit and are the same instructions for changing the cars electrical system from positive to negative earth or vice-versa.
FAQ on the Pertronix Ignition Application
Created: February 01, 2006
Frequently Asked Questions about the use of the Pertronix Ignitor systems. The best information available from the experts at Minimania.com
IGNITION - Establishing a TDC reference point
Created: September 26, 2000
Establishing an accurate TDC reference point is of paramount importance when developing and monitoring ignition timing (and cam timing come to that). When an experienced engine builder assembles an engine - no matter whether for road or race - he will establish an accurate TDC indicator that can be used for ignition purposes.