Classic Austin Mini Competition Head Gasket Various Models
Classic Austin Mini Competition Head Gasket Various Models
Select a "Type" from below.
Provide maximum sealing performance for today’s high output engines and require no sealants. MLS gaskets are ideal for both aluminum and Cast iron heads. MLS gaskets have increased strength because they are comprised of multiple layers of stainless steel; which also creates the ability to rebound and resist corrosion. The outer layers are embossed and coated on both sides with Viton (a flouroelastomer rubber based material that is heat resistant to 250 C/ 482 F). Viton is designed to meet the demands of a variety of harsh sealing environments, load conditions, and surface finishes. The center or shim layer is uncoated stainless steel, which can be varied to accommodate multiple thickness requirements.
Austin Mini competition head gasket for 1275 and 1300 engines 73mm boreAustin Mini competition head gasket for 1275 and 1300 engines 73mm boreAustin Mini competition head gasket for 1275 and 1300 engines 73mm bore
Austin Mini competition head gasket for 1275 and 1300 engines 73mm boreAustin Mini competition head gasket for 1275 and 1300 engines 73mm boreAustin Mini competition head gasket for 1275 and 1300 engines 73mm bore
Austin Mini competition head gasket for 1275 and 1300 engines 73mm boreAustin Mini competition head gasket for 1275 and 1300 engines 73mm boreAustin Mini competition head gasket for 1275 and 1300 engines 73mm bore
Provide maximum sealing performance for today’s high output engines and require no sealants. MLS gaskets are ideal for both aluminum and Cast iron heads. MLS gaskets have increased strength because they are comprised of multiple layers of stainless steel; which also creates the ability to rebound and resist corrosion. The outer layers are embossed and coated on both sides with Viton (a flouroelastomer rubber based material that is heat resistant to 250 C/ 482 F). Viton is designed to meet the demands of a variety of harsh sealing environments, load conditions, and surface finishes. The center or shim layer is uncoated stainless steel, which can be varied to accommodate multiple thickness requirements.
Most 1275cc engines that are rebored to 1380cc are done with the bores off-set to improve head performance and decrease bore distoration. The special head gaskets are not only designed for the increased bore size but have also been offset to match the machined block! Perfect for street or race!
Provide maximum sealing performance for today’s high output engines and require no sealants. MLS gaskets are ideal for both aluminum and Cast iron heads. MLS gaskets have increased strength because they are comprised of multiple layers of stainless steel; which also creates the ability to rebound and resist corrosion. The outer layers are embossed and coated on both sides with Viton (a flouroelastomer rubber based material that is heat resistant to 250 C/ 482 F). Viton is designed to meet the demands of a variety of harsh sealing environments, load conditions, and surface finishes. The center or shim layer is uncoated stainless steel, which can be varied to accommodate multiple thickness requirements.
COMPETITION HEAD GASKET 71MM BORE SIZECOMPETITION HEAD GASKET 71MM BORE SIZE
COMPETITION HEAD GASKET 71MM BORE SIZECOMPETITION HEAD GASKET 71MM BORE SIZE
Most 1275cc engines that are rebored to 1380cc are done with the bores off-set to improve head performance and decrease bore distoration. The special head gaskets are not only designed for the increased bore size but have also been offset to match the machined block! Perfect for street or race!
Provide maximum sealing performance for today’s high output engines and require no sealants. MLS gaskets are ideal for both aluminum and Cast iron heads. MLS gaskets have increased strength because they are comprised of multiple layers of stainless steel; which also creates the ability to rebound and resist corrosion. The outer layers are embossed and coated on both sides with Viton (a flouroelastomer rubber based material that is heat resistant to 250 C/ 482 F). Viton is designed to meet the demands of a variety of harsh sealing environments, load conditions, and surface finishes. The center or shim layer is uncoated stainless steel, which can be varied to accommodate multiple thickness requirements.
Most 1275cc engines that are rebored to 1380cc are done with the bores off-set to improve head performance and decrease bore distoration. The special head gaskets are not only designed for the increased bore size but have also been offset to match the machined block! Perfect for street or race!
Provide maximum sealing performance for today’s high output engines and require no sealants. MLS gaskets are ideal for both aluminum and Cast iron heads. MLS gaskets have increased strength because they are comprised of multiple layers of stainless steel; which also creates the ability to rebound and resist corrosion. The outer layers are embossed and coated on both sides with Viton (a flouroelastomer rubber based material that is heat resistant to 250 C/ 482 F). Viton is designed to meet the demands of a variety of harsh sealing environments, load conditions, and surface finishes. The center or shim layer is uncoated stainless steel, which can be varied to accommodate multiple thickness requirements.
Classic Austin Mini competition head gasket full race 73.5MM bore
Classic Austin Mini competition head gasket full race 73.5MM bore
Most 1275cc engines that are rebored to 1380cc are done with the bores off-set to improve head performance and decrease bore distoration. The special head gaskets are not only designed for the increased bore size but have also been offset to match the machined block! Perfect for street or race!
Provide maximum sealing performance for today’s high output engines and require no sealants. MLS gaskets are ideal for both aluminum and Cast iron heads. MLS gaskets have increased strength because they are comprised of multiple layers of stainless steel; which also creates the ability to rebound and resist corrosion. The outer layers are embossed and coated on both sides with Viton (a flouroelastomer rubber based material that is heat resistant to 250 C/ 482 F). Viton is designed to meet the demands of a variety of harsh sealing environments, load conditions, and surface finishes. The center or shim layer is uncoated stainless steel, which can be varied to accommodate multiple thickness requirements.
Loading...
Loading...
Loading...
Loading...
Loading...
- Home
- Related Websites
- Products
- Articles & Help
- Social
- Visit us on:
-
Mini Mania
870 Gold Flat Rd.
Nevada City, CA 95959 USAPhone: 530.470.8300
Fax: 530.470.8388
Your Login Failed.
Your E-Mail and/or password are incorrect. Please try again.
Passwords are case-sentive.
If you continue to have problems click on the Help Icon for additional options.
Login with your E-Mail Address. If you would like your login information reset, click on the button below to request your login information to be resent.