D16Vtec Mini Update
Total posts: 595
Last post: Feb 22, 2023 Member since:Apr 21, 2012
|
Cars in Garage: 0
Photos: 0 WorkBench Posts: 0 |
|
I pulled the trigger and just loved the Rywire/Minitec Tucked harness they offer and have a potential buyer for my Current Minitec harness and engine harness on my motor now.Losing all the Big connectors connecting the 2 hatness's will help me with the way things are laid out with the car/turbo piping,lines,intercooler,BOV etc. Few people said really? Just to ditch some plugs and have a thinner harness? YES! Every inch counts in a swapped mini with a turbo especially.
Total posts: 169
Last post: Sep 18, 2020 Member since:Jan 28, 2014
|
Cars in Garage: 0
Photos: 0 WorkBench Posts: 0 |
Total posts: 595
Last post: Feb 22, 2023 Member since:Apr 21, 2012
|
Cars in Garage: 0
Photos: 0 WorkBench Posts: 0 |
|
Had the trans fully gone threw ,cleaned,and rebuolt..and the LSD installed by MattSteedleTransmissions ...check him out !!! He is awesome.Focuses mainly on VW trans but does a lot of manual transmissions for peoples race cars hondas etc.Great guy,ships transmissions out daily all over the place.
Motor is in the car and done all ready just waiting for the ECU to come back.Cant wait!!!!!
Total posts: 595
Last post: Feb 22, 2023 Member since:Apr 21, 2012
|
Cars in Garage: 0
Photos: 0 WorkBench Posts: 0 |
|
Total posts: 595
Last post: Feb 22, 2023 Member since:Apr 21, 2012
|
Cars in Garage: 0
Photos: 0 WorkBench Posts: 0 |
|
Total posts: 595
Last post: Feb 22, 2023 Member since:Apr 21, 2012
|
Cars in Garage: 0
Photos: 0 WorkBench Posts: 0 |
|
I have a really good manual transmission guy around my way who's big into VWs/Honda's but knows all manual trans really good.I'm having him install the LSD and go over the trans.I have both of my motors on stands right now and swapping everything over.Can't wait !!
Total posts: 1453
Last post: Dec 15, 2020 Member since:Jan 17, 2000
|
Cars in Garage: 0
Photos: 0 WorkBench Posts: 0 |
|
Just a suggestion. You might want to look at the 96-2000 DX final gear ratio of 3.72. Great longer gear pulls compared to the 4.25 and around 3200rpm at 70mph on 13s.
That is what i have been driving on for nearly 5 years and love it : )
Total posts: 1268
Last post: Feb 23, 2020 Member since:Oct 30, 2008
|
Cars in Garage: 0
Photos: 46 WorkBench Posts: 1 |
Total posts: 595
Last post: Feb 22, 2023 Member since:Apr 21, 2012
|
Cars in Garage: 0
Photos: 0 WorkBench Posts: 0 |
|
I get what you're saying.The D series is so perfect for a daily driven type cruiser.What final drive do you plan to use?
I do street race as well ,I am somewhat cautious with my cars or who I have in the car but I do get reckless at tines.Usually on a road around trees so if someone gets hurt,it will be me.I cant help it,I love it.I am also looking into getting a nice roll cage for my car not just the loop.I'm planning to make some pretty good power this time around.I have boost by gear so in the upper gears I will be pushing a lot of power.I'm pretty excited,I feel like cruising down the highway with 300+ hp will be pretty scary and a whole,lot of fun if it makes it to the ground lol
Total posts: 2018
Last post: Feb 11, 2022 Member since:Oct 9, 2003
|
Cars in Garage: 2
Photos: 3 WorkBench Posts: 0 |
|
Total posts: 1268
Last post: Feb 23, 2020 Member since:Oct 30, 2008
|
Cars in Garage: 0
Photos: 46 WorkBench Posts: 1 |
Total posts: 595
Last post: Feb 22, 2023 Member since:Apr 21, 2012
|
Cars in Garage: 0
Photos: 0 WorkBench Posts: 0 |
|
It may not seem many are interested in this thread but I surprisingly get messages /calls from time to time as I have put my number in them before.There are a lot of people who want to know first hand from someone who BUILT THEIR OWN CAR and On top of it one who built one that is street friendly and not annoying..
.Someone with a turn key drive anywhere type car,any type of cold weather or hot temperature,stand still traffic in 90+ for hours,someone with 10" wheels who tried GOLF CART wheels/diff offsets,did it on a budget in certain areas with a bag of tools and a grinder and a cheap stick welder that I didnt even know how to use before the build.I'm not a master mechanic or fabricator ..this swap is truly quite simple and VERY rewarding when done right.Any issue that people complain about CAN BE RESOLVED by your choices during the build.The car can be as quiet as you want it and smooth as you want it and more reliable then it EVER was if YOU BUILD IT RIGHT AND PAY ATTENTION.
The outcome of the build can be everything you want it to be,you just have to stay focused and make it what you want.If you rush it and dont pay attention to little things you will NOT like the car.That's any car you build to this extent.Leave a few things lose/sloppy here and there and before you know it you have creaks and rattles,exhaust leaks,sloppy steering etc etc all,because you were lazy and didn't pay attention then you wont be happy with it...
Me? I'm careless in ways but love everything about it.I just want a cruise everywhere type car I can race other cars with and surprise the hell out of them lol :)
Total posts: 1268
Last post: Feb 23, 2020 Member since:Oct 30, 2008
|
Cars in Garage: 0
Photos: 46 WorkBench Posts: 1 |
Total posts: 595
Last post: Feb 22, 2023 Member since:Apr 21, 2012
|
Cars in Garage: 0
Photos: 0 WorkBench Posts: 0 |
|
Fresh machined block bored to 75.5 Eagle H beam rods with ARP2000 rod bolts 75.5 Viatara low compression pistons ARP head studs
Should be close to 8 to 1 compression which is super low and I wanted it to be higher because of the lack of room for a larger turbo but I got such a good deal on the rods and pistons I just used them.I'm thinking its going to be a handful once I start getting the boost up high.
Shortblock is assembled and ready to go.
New flywheel Cleaned rebuilt factory head decked and ready to go. Mfactory LSD for trans Y8 head gasket (thinner) raises compression slightly
Need to order a clutch...I'm thinking since the mini is so light it doesnt need as heavy of a duty clutch as a 300hp civic.I don't want to mess up my perfectly silky smooth clutch pedal or lose any driveability like a puck clutch would so ive been debating on the clutch.
Will post pics of the new motor in a few weeks.Been building 2 other cars.
Total posts: 595
Last post: Feb 22, 2023 Member since:Apr 21, 2012
|
Cars in Garage: 0
Photos: 0 WorkBench Posts: 0 |
|
I dont mind talking to myself..for the people who eventually will want to see it..itll be here! I dont need the regulars who dislike my style lol
P.s. sorry i have been slacking...ive been telling people its "broke"...whats wrong? Its missing more boost lol its almost ready to be driven again with the addition of a few more pounds of bost.I actually was bored with it slightly and didnt even want to bring it to the meets until it had atleast double the boost lol car scene around here is picking up lately.. Be back very soon ;)
Total posts: 595
Last post: Feb 22, 2023 Member since:Apr 21, 2012
|
Cars in Garage: 0
Photos: 0 WorkBench Posts: 0 |
|
Hondata s300 is awesome and there are features to help!
Boost by gear...so the car if i have a built motor and high boost wont see that in 1st or 2nd l clearly...that just wont work lol
Also,i forgot i had the minitec rear frame kit.I seen it the other day in the garage and totally forgot! I want to install that soon lol
Total posts: 595
Last post: Feb 22, 2023 Member since:Apr 21, 2012
|
Cars in Garage: 0
Photos: 0 WorkBench Posts: 0 |
|
Been playing with boost some.Just got RC550s ,my a2w intercooler,a2w water cell and pump.Ordered 25' of hose to plumb it in.Man fitting stuff under the hood is tough! Lol once thats all fully installed i will be going higher.
Been driving the car a ton,its awesome.Gets me away from my rwd cars and is just all around different.Dont get me wrong i love my turbo mustangs and still play with them but this is just different and i can go to a local meet and play around with other cars and have some fun.
The front end is coming off again this week.I have the minitec hinges on it and i am going to fab up some brackets to hold a set of different hinges so i can pull a hood release inside the car like a factory car would,and get out and lift it straight up like a hood rather then pull out then flip up like minitec.I eventually would like to maybe have my buddy help me do an electric front so i can just pull a lever to release then push a button and up it gos but thats down the road.Its been done though!!
Started a youtube page recently so i will get a few videos uploaded then post some links on here ! Ive just been playing with the boost levels and its cool that the cars soo small and light that even going up 15-20hp you feel a decent difference lol i really want to get a built motor in there and get it worked out the way i want but i will post videos As i progress 4psi-24psi! Lol well see where the boost stops
Total posts: 595
Last post: Feb 22, 2023 Member since:Apr 21, 2012
|
Cars in Garage: 0
Photos: 0 WorkBench Posts: 0 |
|
Injectors on the way,figuring out a charge cooling idea or which way i want to go with it.A2w or just do methenol injection...not sure yet.Both have positives and negatives amd trying to figure out which i want to deal with.I will be raising the boost to 12-14psi hopefully with this little turbo and seeing how it is there.
Hondata s300 is great so 1st gear and 2nd gear will see lower boost levels then 3rd and up gears.1st will only have 4 psi probably..6psi in 2nd..then 3rd and up max boost lol
If that works out well i will be building a new motor built for whatever i can throw at it.Cam and the higher gears will be pushing the turbo to its max PSI in efforts to break 300whp..lets see where it ends up being too much..lol
Total posts: 595
Last post: Feb 22, 2023 Member since:Apr 21, 2012
|
Cars in Garage: 0
Photos: 0 WorkBench Posts: 0 |
|
Idling the car is spot on and light throttle cruising but WOT i have a boost table that in boost retards the timing and adds fuel in boost only and would make some passes and see where its at.Its getting closer...wideband gauge reads 11.9 and quickly down to 11.3 as the pedal hits the floor and by nearly 7k it hit 10.9 which is super rich...gotta lean it out some and maybe put a little more timing in it since im pulling 2 degrees per psi to start (only 4-5psi currently)
Meetthespeakers you will love the hondata and the things you can do with it.Its awesome and real user friendly,i just dont know what im doing really ...i just know my tuner the main things he did was pull timing and add fuel so thats a safe place to start,deff want to have it dyno tuned from a well known honda tuner around my way but im trying to make sure all is well and i want to fogure out where u want to be power wise..right now its cool because its simple...
If i want more power i have to do injectors,intercooler,fuel pump naybe to get me to 220ish whp...then if i want more i have to put this piston and rod motor together and crank the boost way up.Whats awesome is the hondata you can set up boost by gear ..so i can add all the boost in the upper gears since i can tell 1st gear isnt going to like a ton of boost lol
Fun..and not for a NON driver kindve person .Deff hsve to know what youre doing and pay attention at all times.
Total posts: 595
Last post: Feb 22, 2023 Member since:Apr 21, 2012
|
Cars in Garage: 0
Photos: 0 WorkBench Posts: 0 |
|
It was giving me a little trouble in a few ways but mainly my fault and the junk laptop i dug up to help me but it runs way smoother now then before normal driving,idling etc.Its also is super easy to change a tune and upload a diff tune to the ecu.Literally click a tune,turn the key in on position..hit upload...shut off and turn back on and youre on the new tune lol Have to weld the wideband bung into the new exhaust set up/downpipe and see where we are but the NOT SO SMART side of me had to hear the turbo spool and wastegate open as usual lol 4 psi and the added fuel/reduced timing.
i need an intercooler set up but i want to see how traction is at around 6psi for now..if its good i will add the intercooler and go up in boost until i cant use any more lol